Carpet Protector is an advanced water based fluorochemical polymer providing premium protection for nylon and wool carpeting. It has been professionally formulated to create a durable, highly repellent property to each fibre. This repellent nature which includes specialty red dye blockers, holds spills and stains close to the surface and enables them to be removed before causing permanent staining. Carpet Protector also repels dry soiling, and releases these dry soils to vacuuming which in turn promotes carpet longevity.

$62incl. GST

Size: 1kg

Click & Collect in Victoria FREE Shipping Over $350 (Melbourne Metro Only)

  • Advanced Protection – Modern flourochemical polymer technology provides premium protection against water based stains, oil based stains and general grime.
  • Red Stain Protection – specialty stain blockers provide added protection against acid dye stains caused by red cordial spills.
  • Dry Soil Removal – promotes effective dry soil removal, making vacuuming easy and effective.
  • Makes Cleaning Easier – makes routine carpet cleaning by wet extraction significantly more successful as the soiling is released quicker and easier.
  • Low VOC – water based low VOC Formula
  • Wool Friendly – exceeds the specifications for the safe protection of wool.
Qty.

FAQ's

 
Application:
  • Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.
  • Ensure that the carpet is clean and free of chemical residue. If wet extraction cleaning is to be done prior to the protection treatment, it is best to finish with an acid rinse. Leave the carpet as dry as possible
  • Can be applied to dry or damp fabric.
  • Dilute 1:2 for clean damp carpets. Apply at a rate of 340 to 510ml per 5m2. (1 gallon per 400 to 600sq.ft)
  • Dilute 1:4 for clean dry carpets. Apply at a rate of 575 to 850ml per 5m2. (1 gallon per 250 to 350sq.ft)

See Actichem protector coverage charts

  1. Spray Fibre Shield from 25 to 50cm away from the carpet using smooth back and forth motion overlapping slightly.
  2. Start by applying one coat to high traffic areas. Then starting from one end of the room, treat all the carpeted area including the high traffic areas previously treated.
  3. Brush with a soft brush to spread protector evenly.
  4. Align fabric and speed dry.
Sprayer Recommendation
  1. Use a low pressure or electric sprayer with an 8004 jet maintaining 35-50psi. Dedicate sprayer to Fibre Shield.
Top

Ask Quick Question

Digital Strategy by ZeemoTM