Intense Pro 500ml
SKU: 42028 CH-AIntense Pro is a premium quality sealer which enhances and enriches the natural colour and beauty of all stone types, whilst imparting outstanding stain protection and water repellency. Intense Pro beautifies and enriches the natural colouring found in stone by making the stone more light absorbent. The more light that is absorbed by the stone, the darker it will appear to the naked eye. Whilst the body of the substrate is darkened, the higher density minerals and exposed aggregates are brightened which lifts the appearance of the whole area.
Size: 500ml
Click & Collect in Victoria 
FREE Shipping Over $350 (Melbourne Metro Only)
Benefits
- Advanced Chemistry: Bonds chemically using nano-particle technology to create a long-lasting, sub-surface shield.
- Enriching Sealer: Amplifies light absorption to highlight natural veining and depth of colour.
- Conceals Imperfections: Minimises the visibility of scratches and surface flaws.
- Premium Protection: Guards against food, oil, mould, mildew, efflorescence, and environmental pollutants.
- Natural Look: Enhances appearance without altering surface texture or creating gloss.
- Vapour Permeable: Allows trapped moisture to escape, preventing damage from below-surface water.
- Safe to Use: Free from chlorinated hydrocarbons and not listed as a carcinogen.
- Colour Lift: Distinctly brightens and enriches stone tone without dulling or film-forming residue.
Applications
Application areas and surface suitability
Intense Pro is a colour enhancing sealer for natural stone and concrete.
Intense Pro is well suited to dense stone types and concrete. Intense Pro includes high performance penetrating agents which give it greater ability to penetrate small pores, penetrate to greater depths and enables easier application.
Expected Wear:
Intense Pro will provide premium protection for up to 10 years and in many applications, several years longer. However application methods, weather conditions, traffic, harsh cleaning methods and substrate type will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life. It is recommended that the sealer be re-applied every 5 – 7 years where harsh conditions exist.
Considerations:
Not to be used as a sub-terrain waterproofing. Should not be applied if temperature is above 32 degrees or if rain is expected within 24 hours of application. If rain has preceded the application, the surface should be allowed 24 hours to dry completely.
How to use
Read and understand the SDS before use.
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.
Preparation:
- New installations must be fully cured before application of Intense Pro (Min 48 hours)
- Existing stone, tile and grout must be totally clean, dry and chemical free.
- Coverage is 5 to 10m2 / Litre per coat. The coverage for the 2nd application is typically double.
Dilutions
Ready to use (do not dilute)
Application
- Apply 1 to 2 applications of Intense Pro by generously saturating the surface using a polish applicator, or roller to an area which can be easily reached. (Approximately 15m2). Ensure even coverage.
- The surface must be shiny wet with a liquid film for at least 1 minute. For very porous substrates more sealer may need to be applied.
- Allow 2 – 10 minutes for the sealer to absorb into the surface and then move the excess product with a squeegee to a new section.
- If a second coat is to be applied, wait 1 to 2 hours, and repeat the process. The second application can be applied days later.
- Using absorbent toweling or applicator, wipe off any sealer remaining on the surface after 10 minutes of the last application. Moisten the towel with Methylated Spirits to remove residues which have dried on the surface.
- Allow 6 hours before returning area to traffic. Keep dry for 24 hours. Achieves a full cure in 24-48 hours.
Ask Quick Question
Digital Strategy by ZeemoTM
