Percide 5L
SKU: 42027-CH-AActichem’s Percide (AP610) is an advanced peroxide-based disinfectant for eradicating mould and decontaminating infectious environments. Its unique formula penetrates deep into porous surfaces and reacts aggressively with mould spores and growth to eradicate them completely, while also removing mould stains and brightening the treated surface. Percide doesn’t encapsulate or hide mould. It destroys the spore roots, for consistent 100% clearance reports on every mould remediation job.
Percide also shows incredible biocidal activity against bacteria and viruses. Tested against the hospital-grade disinfection test and the AOAC Hard Surface Carrier test, it achieves total microorganism elimination in only 60 seconds, and a >4.5 log reduction against Aspergillus brasiliensis in just 10 minutes. You can see its aggressive reaction in the rapid fizzing as it contacts mould and lifts it from surface pores. With a very favourable and economical ready-to-use profile, Percide is a product of choice.
Click & Collect in Victoria 
FREE Shipping Over $350 (Melbourne Metro Only)
- Disinfection – Disinfects bio-contaminated surfaces, killing mould and removing the staining.
- Advanced Peroxide Formula – A unique peroxide formula delivers incredible disinfection and mould eradication performance in a low-toxicity, easy-to-use form.
- Penetration – A powerful antimicrobial package combined with super-wetting technology lets the biocide penetrate faster and deeper into fibres and porous substrates for ultimate sanitisation.
- Cleaning and Destaining – Lifts mould from surface pores and provides incredible cleaning and destaining action on mould and bacterial discolouration.
- Eliminates Odours – Removes odours at their source through powerful antimicrobial action against odour-causing germs.
- Environmentally Safe – Inherently biodegradable and an environmentally responsible choice. Safe for use in food environments.
Specifications
- pH – 5.5–6
- Dilution – Ready to use (or mix 9:1 with Percide Boost)
- Accreditation – TGA Listed
- Fragrance – None
- Safety – Warning
- Colour – Clear
- Surfaces – Carpet, Upholstery, Natural Stone, Ceramic & Porcelain, Concrete & Masonry, Plasterboard, Rubber, Timber, Vinyl
Applications
How to Use
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use. Percide is safe for use on many synthetic carpets and fabrics, but fibres destabilised by disaster activity could be affected.
Dilution
No dilution necessary. For enhanced mould build-up removal and biocidal action, mix 9 parts Percide with 1 part Percide Boost, and use within 8 hours.
Application
- Remove and clean away all wet and dry debris.
- Apply Percide solution to the affected area, making sure all surfaces come into contact with it. Apply by spray, wet fog, mop or cloth.
- Agitate briefly where possible to promote penetration into porous substrates. Thorough agitation will dramatically aid mould and stain removal.
- Allow a minimum of 1 minute dwell time for disinfection, or 10 minutes for mould remediation.
- Rinse thoroughly with clean water.
- Repeat the process if needed for heavy mould conditions.
Additional Information
- For heavy mould situations, mix Percide with Percide Boost for accelerated mould eradication and cleaning performance.
- Agitate thoroughly to achieve a perfect result.
- After cleaning and disinfection are complete, Percide can be applied as a post-residual treatment to help inhibit fresh mould growth.
- For more information on mist spraying and fogging, download the PDS.
Ask Quick Question
Digital Strategy by ZeemoTM
